CASTING FLOORShroud ManipulatorPowder FeederTundish & Ladle Drying and Preheating
RUNOUTTorch CuttingDeburringSlab | Bloom | Billet Marking & ReadingCoolingTransfer & Handling
SIZING & CONDITIONINGScarfingTorch CuttingManual / Portable Sizing | ConditioningMobile Scarfing- and Torch Cutting EquipmentTurningTransfer & HandlingStacking & Charging
LONG ROLLINGRollingTransfer & HandlingAbrasive Cutting | Sawing | ShearingCooling | StraighteningStacking & Packing
IDENTIFICATIONPlate | Sheet | Coil Marking & ReadingLong Products Marking & Reading
INSPECTIONLong Rolled Products InspectingBillet | Bloom Inspecting
TESTINGFatigue TestingInspection | MeasuringDestructive Testing
PRODUCTIONDeburring | Drilling | MeasuringMarking & Tracking | ScanningSealing Plug Handling
CHUCKING & WORKHOLDINGLatheDrillingBalancing & Measuring
REVAMPS & UPGRADES
SERVICE & SUPPORT
The Shroud Manipulator is built to achieve an easy handling of the shroud and enables the user to get a straight connection between the ladle slide gate and tundish.
Read more … SM-Shroud Manipulator
The Mould Powder Feeder is designed for the automatic distribution of casting powder into the mould which ensures a constant uniform mould powder distribution during the ...
Read more … PF-Powder Feeder
The automatic preheating equipment designed for drying and heating ladle and tundish.
Read more … PH-Preheating Station
The high performance Alpine Metal Tech Torch Cutting Machine is designed for cutting casting products on the fly or offline products.
Read more … TC-Torch Cutting Machine
The in-line rotary hammer type deburring machine is designed for removing burrs from continous casting products (slab, bloom, billet) caused by torch cutting.
Read more … DB-Deburrer
The Metal Powder Marking Machine is designed for marking of slabs and blooms by blowing metal powder through a gas flame for melting it to the surface of the product.
Read more … MP-Metal Powder Marking Machine
The Hot Spray Marking Machine is designed for the marking of slabs and blooms by blowing liquid metal which is melt in an electric arc between two wires to the surface of ...
Read more … HS-Hot Spray Marking Machine
The Single Nozzle Paint Marking Machine is designed for the marking of coils, tubes and sections as well as for slabs, blooms and billets based on paint marking with sing ...
Read more … SN-Single Nozzle Paint Marking Machine
The Revolving Head Stamping Machine is designed for the permanent marking of slabs, blooms and billets by the stamping of unmistakable and full characters.
Read more … RH-Revolving Head Stamping Machine
The Dot Paint Marking Machine is designed for the marking of coils, slabs, blooms and billets based on paint marking with 7 or 9 nozzle marking sections.
Read more … DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)
The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...
Read more … RT-Reading & Tracking System
The Scarfing Manipulator eliminates surface impurities from casting products in selective areas and is used for scarfing of bands.
Read more … Scarfing Manipulator
Scarfing Machines eliminate surface impurities from casting products in all areas. 2-or 4 side scarfing machines are available with the corresponding throughput.
Read more … Scarfing Machine
The Torch Cutting for slitting and transversal cutting is designed to cut slabs, twins, billets or blooms to the final dimnesions requested by the customer.
Read more … Torch Cutting (Finishing, Slitting or Cross-Cutting)
The hand-operated Cutting Torch is designed for emergency cuts in continuous casting plants and cutting up scrap parts.
Read more … Manual/Portable Sizing | Conditioning
The Alpine Metal Tech CCM Package supports and optimizes the performance of continuous casting machines and consists of a shroud manipulator, a powder feeder, a preheatin ...
Read more … CCM-Package